Skip to content
New

Client galleries are here.

See Galleries

OM System OM-1 Mark II Shutter Count

The checker can't read a shutter count from an OM System OM-1 Mark II file. Here is how to get the count instead. OM System rates the shutter for 400,000 cycles.

Check a camera

Drop a photo or choose a fileAn unedited JPEG, HEIF, or RAW file straight from the camera

Your photo never leaves this device

  • Read by this page in your browser. There is no upload and no server copy.
  • Only the camera metadata and its small built-in preview are read.
  • Works offline. Load the page, turn off Wi-Fi, and check.
  • Serial numbers stay masked and are never saved.

OM System OM-1 Mark II

Rated shutter life
400,000 cyclessource
Count in the file
No
Files that work
None hold a count

Check the camera's service menu, or ask an authorized service center to read it from the body.

All OM System bodies

Rated shutter life of the OM-1 Mark II

OM System rates the OM-1 Mark II's shutter for 400,000 cycles. Source: my.omsystem.com.

All 2 OM System bodies with a published rating in our table carry the same figure. It shares the figure with the OM-1.

A rated life is the number of cycles OM System tested the shutter to. It isn't a guarantee or an expiry date: many shutters last well past it, and some fail sooner.

Is the OM-1 Mark II's shutter count in its files?

No. OM System cameras don't write a shutter count to their photos, so no photo can be used to read one. That includes the OM-1 Mark II.

The checker can still open the file and name the camera, but there is no count in it.

Check the camera's service menu, or ask an authorized service center to read it from the body.

How to get the OM-1 Mark II's shutter count

  1. Skip the photo. An OM System OM-1 Mark II file holds no shutter count the checker can read, so it will name the camera and say so.
  2. Check the camera's service menu.
  3. Or ask an authorized OM System service center to read it from the body.
  4. With the number in hand, divide it by 400,000 to see the share of rated life used. The table below works through a few counts.

Percent of rated life used

Divide the count by the rated figure and multiply by 100. For the OM-1 Mark II that is count ÷ 400,000 × 100.

CountArithmeticRated life used
10,00010,000 ÷ 400,000 × 1002.5%
50,00050,000 ÷ 400,000 × 10012.5%
100,000100,000 ÷ 400,000 × 10025%
200,000200,000 ÷ 400,000 × 10050%

The checker can't supply the count for the OM-1 Mark II, so use the figure from the camera or a service reading.

Buying or selling a used OM-1 Mark II

  • Buyers: a photo can't confirm an OM System OM-1 Mark II's count, so a number in a listing is the seller's word unless it comes with a reading. Ask where the figure came from.
  • Sellers: if you quote a count, say how it was read (the camera's service menu, or an authorized OM System service center).
  • For scale: the OM-1 Mark II reaches a quarter of its rated 400,000 cycles at 100,000 and three quarters at 300,000.
  • Then estimate what the body is worth with the camera gear depreciation calculator.

The count is one data point next to the camera's condition and service history.

Questions

How do I check the shutter count on an OM System OM-1 Mark II?

Not from a photo. OM System cameras don't write a shutter count to their photos, so no photo can be used to read one. Check the camera's service menu, or ask an authorized OM System service center to read it from the body.

What is the rated shutter life of the OM System OM-1 Mark II?

OM System rates the OM-1 Mark II's shutter for 400,000 cycles. It is the figure the shutter was tested to, not a guaranteed limit: many shutters last well past it, and some fail sooner.

Is 100,000 a high shutter count for an OM System OM-1 Mark II?

100,000 actuations is 25% of the 400,000 cycles OM System rates the OM-1 Mark II's shutter for. The rating is a tested figure, not a limit, so condition and service history matter as much as the number.

Why can't the checker read my OM-1 Mark II?

OM System cameras don't write a shutter count to their photos, so no photo can be used to read one. The checker can still open the file and name the camera, but there is no count in it.

Keep every body's history in one place

GearDex logs each body's shutter count over time, read from a photo in the same private way, beside the purchase, service, and sale records a buyer asks about.

Stop managing gear with spreadsheets.

Join 300+ photographers, studios, and rental houses who already run their kit on GearDex.

  • Free forever plan
  • No credit card
  • Import from CSV
  • Mac, Windows & web