Skip to content
New

Client galleries are here.

See Galleries

Pentax K-5 IIs Shutter Count

Drop one original photo from a Pentax K-5 IIs to read its shutter count. Pentax rates the shutter for 100,000 cycles, so you also see how much of that it has used.

  • Never uploaded
  • Works offline
  • Print a report for a buyer

Check a camera

Drop a photo or choose a fileAn unedited JPEG, HEIF, or RAW file straight from the camera

Your photo never leaves this device

  • Read by this page in your browser. There is no upload and no server copy.
  • Only the camera metadata and its small built-in preview are read.
  • Works offline. Load the page, turn off Wi-Fi, and check.
  • Serial numbers stay masked and are never saved.

Pentax K-5 IIs

Rated shutter life
100,000 cyclessource
Count in the file
Mechanical shutter count
Files that work
JPEG, PEF, DNG
All Pentax bodies

Rated shutter life of the K-5 IIs

Pentax rates the K-5 IIs's shutter for 100,000 cycles. Source: ricoh-imaging.co.jp.

That is the lowest figure among the 10 Pentax bodies with a published rating in our table, which reach 300,000. It shares the figure with the KP, K-5 and K-5 II.

A rated life is the number of cycles Pentax tested the shutter to. It isn't a guarantee or an expiry date: many shutters last well past it, and some fail sooner.

Is the K-5 IIs's shutter count in its files?

Yes. The K-5 IIs writes its shutter count into the maker notes (tag 0x005D), scrambled with the photo's own date and time. The checker unscrambles it with the date and time stored beside it; if those fields are missing or were changed, it shows no count instead of a wrong one.

Pentax notes the count can reset when a shutter is serviced.

Use an original JPEG, PEF or DNG file copied straight from the memory card. HEIF files are read the same way on bodies that shoot them.

How to check the K-5 IIs's shutter count

  1. Take one photo with the K-5 IIs. Any settings will do; use the mechanical shutter.
  2. Copy the newest JPEG, PEF or DNG file straight off the memory card, or connect the camera by USB. Don't open and re-save it first.
  3. Drop the file into the checker at the top of this page. It is read in your browser and never uploaded.
  4. The figure labelled Shutter count is the mechanical shutter count.
  5. The meter under the count shows how much of the 100,000 rated cycles it has used.
  6. If the checker says the camera notes were removed, the file passed through an editing app, phone library, cloud upload or messaging app. Go back to the original.

Percent of rated life used

Divide the count by the rated figure and multiply by 100. For the K-5 IIs that is count ÷ 100,000 × 100.

CountArithmeticRated life used
10,00010,000 ÷ 100,000 × 10010%
50,00050,000 ÷ 100,000 × 10050%
100,000100,000 ÷ 100,000 × 100100%
200,000200,000 ÷ 100,000 × 100200%

Past 100% doesn't mean the shutter has failed. The rating is the figure Pentax tested to, not a limit.

The checker does this for you: the meter under the count shows the share of 100,000 used.

Buying or selling a used K-5 IIs

  • Buyers: ask the seller for an original, unedited JPEG, PEF or DNG file shot that day and drop it into the checker. It shows the body's serial number when the file carries one, masked until you reveal it, so you can match it to the camera in your hands.
  • For scale: the K-5 IIs reaches a quarter of its rated 100,000 cycles at 25,000 and three quarters at 75,000.
  • Ask about service: Pentax notes the count can reset when a shutter is serviced, so a low number on an older body is worth a question.
  • Sellers: print the report from the checker and include it in the listing. It answers the question before it's asked.
  • Then estimate what the body is worth with the camera gear depreciation calculator.

The count is one data point next to the camera's condition and service history.

Questions

How do I check the shutter count on a Pentax K-5 IIs?

Take a photo, copy the original JPEG, PEF or DNG file straight off the memory card and drop it into the checker on this page. It reads the count Pentax wrote into the file, in your browser, without uploading the photo.

What is the rated shutter life of the Pentax K-5 IIs?

Pentax rates the K-5 IIs's shutter for 100,000 cycles. It is the figure the shutter was tested to, not a guaranteed limit: many shutters last well past it, and some fail sooner.

Is 50,000 a high shutter count for a Pentax K-5 IIs?

50,000 actuations is 50% of the 100,000 cycles Pentax rates the K-5 IIs's shutter for. The rating is a tested figure, not a limit, so condition and service history matter as much as the number.

Can the K-5 IIs's shutter count reset?

Pentax notes the count can reset when a shutter is serviced. A low number on an older body is worth asking the seller about.

Which K-5 IIs files work in the checker?

An original JPEG, PEF or DNG file copied straight from the memory card. Edited, exported, converted or messaged copies usually lose the maker notes that hold the count, and the checker will say the camera notes were removed.

Keep every body's history in one place

GearDex logs each body's shutter count over time, read from a photo in the same private way, beside the purchase, service, and sale records a buyer asks about.

Stop managing gear with spreadsheets.

Join 300+ photographers, studios, and rental houses who already run their kit on GearDex.

  • Free forever plan
  • No credit card
  • Import from CSV
  • Mac, Windows & web